Water Treatment News

We have been working on updating our installation and setup instructions for the products that we sell. We have a generic assembly and installation page that covers nearly every type of water softener or whole-house filter, but we also compile a list of specific questions that are emailed to us and we used that list to design this new, more specific guide.

We also tried to address some of the questions we get over the phone pertaining to this specific softener, but quite frankly it is difficult to compile a proper list of questions from people calling over the phone. In the first place most of the time we get calls from people that bought the system from a competitor or local dealer. We have no way of knowing what was included with the system or even what type of media it contains. So the phone call questions were discarded.

But this guide was created and compiled from hundreds of questions, and experiences with our Fleck model 5600 Econominder and if you read the whole thing, you’ll notice that we address common mistakes made by even professional installers. Check out the Fleck 5600 Installation and Setup Guide here. We will be producing more product specific guides each week and we’ll keep you posted here, so check back often.

Oh, and if you have any comments on this guide and future ones, please be sure to let me know!

We have some new equipment and software at Water Value now and it appears to be speeding things up quite a bit. That and the addition of another order entry specialist. Things are now going smooth and we’re able to keep up with the phone calls. Speaking of phone calls, here I go again.

We are not the manufacturer of the fine products that we sell. Also, nobody here is going to recommend one of our 3 brands over the others. If we felt one brand was better than the other, we would only sell that brand. Keep in mind that we thoroughly test everything we sell on the web site. If we did not, we would not be able to answer your questions properly. Simply attending a factory sponsored demonstration does not cut it. We purchase from the factory, hook the equipment up, test it, evaluate it, abuse it and even rip it apart just to make sure that what you the consumer, are buying is going to work as advertised for you right out of the box.

We are in this business for the long-haul and we have no intentions of selling water treatment equipment that is sub-standard.